Solar panels4 min read

Does cleaning solar panels increase output?

Clean glass lets more light reach the cells. How much that is worth on your roof is something you can measure yourself.

Long rows of ground-mounted solar panels across a dry field

It is the question we hear most from solar owners: if I have my panels cleaned, will I get more electricity? The short answer is that clean panels are better placed to produce what they were designed to. The longer answer is that the size of the difference depends on your roof, and anyone who promises you a fixed percentage without seeing your system is guessing.

This article explains why dirt affects output, why the effect varies so much, and how to check the result on your own installation.

How dirt gets in the way

A solar panel is a sheet of glass over a layer of cells. The cells turn light into electricity, and the glass protects them. Anything sitting on the glass reduces the light that gets through.

Dirt does this in two different ways:

  • An even film, such as fine dust or a dried salt haze, dims the whole panel a little. You may barely see it from the ground.
  • A concentrated patch, such as a bird dropping or a clump of leaves along the bottom edge, blocks light completely on part of the panel.

The second kind can matter more than its size suggests. Panels are wired so that cells work together, and a heavily shaded section can hold back the output of the cells around it. That is why a few large droppings are worth removing even when the rest of the panel looks clean.

Why nobody can promise a percentage

You will see figures online for how much output dirty panels lose. Some are based on research in very dusty deserts, others on lightly soiled panels in rainy climates. None of them is your roof.

How much a clean changes your output depends on:

  • How dirty the panels were. A thin film after a few weeks is not the same as a year of salt, dust and droppings.
  • The angle of the panels. Low-angle panels collect more dirt and are rinsed less by rain than steep ones.
  • Where the dirt sits. Shading at the bottom edge, where grime collects, affects some panel layouts more than others.
  • The season and the weather. Output changes with the sun’s angle, cloud and temperature, which can hide or exaggerate the effect of a clean.

For these reasons we don’t put a percentage on a clean. What we can say honestly is that clean glass lets more light through than dirty glass, and that panels left dirty for long periods are not performing as well as they could.

How to measure it on your own system

Most modern inverters come with an app or a display showing how much electricity your system produces each day. That gives you the best possible evidence, because it measures your panels on your roof.

  1. Note a few clear, sunny days before the clean. Write down the daily production in kWh.
  2. Have the panels cleaned.
  3. Compare the next few clear, sunny days afterwards. Use days as similar as possible in weather and time of year.

A single day can mislead you, because one hazy afternoon changes everything. Comparing several clear days on each side gives a much fairer picture.

When a drop means a fault, not dirt

Dirt builds up slowly, so it causes a gradual decline over weeks or months. If your output drops suddenly, from one day to the next, dirt is unlikely to be the reason. A sudden drop can point to:

  • an inverter fault or error message
  • a tripped breaker or isolator
  • a damaged cable or connector
  • new shade, such as a growing tree or a new building nearby

In those cases, contact your installer before booking a clean. Cleaning won’t fix an electrical problem, and you will want it found quickly.

Getting the most from a clean

If you are going to have your panels cleaned, a few things help you get full value from it:

  • Time it well. Many owners book a clean after the dry, windy months, so the panels are clear for the long days of summer.
  • Clear what you can around the roof. Trimming overhanging branches reduces leaves and droppings between cleans.
  • Keep an eye on the app. Once you know what clean panels produce on a sunny day, you will notice when output starts to slip again, and you can book before it gets bad.

The honest answer

Cleaning removes something that is blocking light from your panels, so it gives them the best chance to perform as designed. How much that is worth on your roof depends on how dirty they were and on the season, and the most reliable way to find out is to compare your own inverter readings.

If you would like your panels cleaned, see our solar panel cleaning page or read how often panels in Gqeberha need cleaning.

Ready for a cleaner property?

Tell us what needs cleaning and where you’re located. We’ll help you find the right cleaning solution.

WhatsApp
Get a quote WhatsApp