Work out your estimate
Use your own inverter figures. Everything updates as you type, and nothing is sent anywhere until you ask for a quote.
Enter your monthly generation and electricity value to see the estimate.
Estimated annual rand impact
R 0
at 5% soiling loss
- Monthly rand impact
- R 0
- Monthly energy loss
- 0 kWh
- Annual energy loss
- 0 kWh
- Clean-panel generation
- 0 kWh
This is a scenario estimate, not a measurement. It treats the generation you entered as output with the chosen level of soiling, and works out what the same system might produce with that soiling removed. Real losses depend on dust and salt levels, rainfall, panel tilt and condition, shading and your installation. Cleaning may not recover the full estimated loss.
Want to get more from your solar installation?
Send us your details and, if you can, a photo of your panels. We’ll come back with a free cleaning quote.
Ask us on WhatsAppHow the estimate works
Four steps, shown with a worked example of 1,000 kWh a month, 5% loss and R3.00 per kWh.
Clean-panel baseline
Your generation divided by one minus the loss. 1,000 ÷ 0.95 = 1,052.6 kWh a month with that soiling removed.
Energy loss
The baseline minus what you generate now. 1,052.6 − 1,000 = 52.6 kWh a month, or 631.6 kWh a year.
Monthly rand impact
The energy loss times your electricity value. 52.6 kWh × R3.00 = R157.89 a month.
Annual rand impact
The monthly figure times 12. R157.89 × 12 = R1,894.74 a year.
What the estimate can’t tell you
It is a scenario, not a measurement of your panels.
Real losses vary
- Dust, salt and droppings build up differently on every roof
- Rain rinses some soiling away, more on steep panels
- Panel age, condition and tilt all play a part
- Shade, heat and the season change output too
Measure it on your own system
- Note production on a few clear, sunny days
- Compare the same kind of days after a clean
- Treat a sudden drop as a possible fault, not dirt
- Ask your installer about anything unusual
Calculator questions
Where do I find my average monthly generation?
Most inverters have an app or a display that shows production by day and by month. Use the monthly total, or average a few recent months. If you only have daily figures, add up a typical month.
What electricity value should I use?
Use what one unit of electricity (one kWh) costs you, from your municipal or Eskom bill, including VAT. If you sell power back to the grid, you can use your feed-in rate for the part you export.
Why is my system size optional?
The estimate only needs your generation, the loss percentage and your electricity value. The system size is used to show how much you currently generate per kW installed, which helps you compare months and seasons.
Where do the 2%, 5% and 8% scenarios come from?
They are illustrative scenarios for light, moderate and heavy soiling, not measurements of your roof. If you have measured your own loss, for example by comparing output before and after a clean, choose “My own” and enter it.
Will cleaning recover the full estimated amount?
Not necessarily. The calculator shows what a given level of soiling could be worth. How much a clean recovers depends on how dirty the panels really are, the weather, the panel condition and the installation. The honest way to judge it is to compare your inverter readings on similar sunny days before and after.
Get your panels cleaned
Send a photo of your roof and the number of panels. We’ll come back with a free quote.
