Solar panels5 min read

How to tell if your solar panels need cleaning using your inverter app

Your inverter app already holds most of the evidence. Here is how to read it, what to check from the ground, and when to book a clean.

Solar panels on a ground frame angled toward the sky

Most solar owners in the Eastern Cape have an app on their phone that shows what their system produces, and most of them only open it when the lights go off. That is a pity, because the same app is the best tool you have for working out whether your panels need cleaning. It measures your own panels on your own roof, which is more useful than any general rule.

This guide shows you how to read your daily production, how to compare days fairly, and how to tell the slow fade of dirty glass from the sudden drop of a fault.

Reading daily production

Every inverter brand lays out its app a little differently, but almost all of them show the same few numbers:

  • Daily production, usually in kWh. This is the total your panels made that day, and it is the figure to watch.
  • Live power, in W or kW. This jumps around with every passing cloud, so it is less useful for spotting dirt.
  • A daily curve, showing power from sunrise to sunset. On a clear day it forms a smooth hill, highest around midday.

If your system has a battery, make sure you are looking at what the panels produced (often called PV or solar production), not what the house used or what the battery delivered. Those numbers can change for reasons that have nothing to do with the state of your glass.

Comparing like-for-like sunny days

One day on its own tells you very little. A hazy morning, a few hours of cloud or a gusty south-westerly bringing in murky air can all pull a day’s total down. To see the effect of dirt, you need to compare days that should have produced about the same.

  1. Pick clear, sunny days. On a clear day the daily curve is a smooth hill with no dips. Ignore days with a ragged curve.
  2. Compare the same time of year. Panels produce more in December than in June because the days are longer and the sun is higher. Compare this November with last November, or this week with a few weeks ago, not summer with winter.
  3. Use several days on each side. Note three to five clear days, then do the same a few weeks later. An average of several days is far more reliable than one.
  4. Write it down. A simple note on your phone with the date and the daily kWh is enough. Over a few months it becomes a record of what your system does when it is clean and when it is not.

If you have had your panels cleaned before, the clear days just after that clean are your best reference point. That is what your roof can do with clear glass at that time of year.

Gradual decline versus sudden drop

The shape of a fall in production tells you a lot about its cause.

A gradual decline over weeks or months, on clear days at a similar time of year, is what dirt looks like. Dust, salt film and droppings build up slowly, so the numbers slip slowly too. After a dry, windy spell, or a berg wind that blows dust in from inland, you may notice the slide speed up.

A sudden drop from one day to the next is a different story. Dirt very rarely appears overnight. A sudden change is more likely to be:

  • an inverter error or fault message
  • a tripped breaker or isolator
  • a damaged cable or connector
  • new shade, such as a tree that has grown or a structure built next door

One exception is worth knowing: a bird can leave a large dropping on a panel in a single morning, and on some panel layouts that one patch of shade holds back more than its size suggests. We explain why in our article on bird droppings on solar panels.

What to look for from the ground

The app tells you that something has changed. Your eyes help confirm that it is dirt. Please do this from the ground, from an upstairs window or from a neighbour’s garden, never from the roof.

  • A grey or white haze across the glass, especially on homes near the sea in Summerstrand, Humewood or Bluewater Bay, where salt spray dries on every surface.
  • White or dark spots, which are usually droppings, often near the top edge where birds perch.
  • A dirty band along the bottom edge of each panel, where light rain washes dust down and leaves it behind as it dries.
  • Leaves or pollen collecting against the frames, common under the big trees in Walmer and other older suburbs.

A useful trick is to compare the panels with a window you cleaned recently. If the panels look dull next to it, they probably are.

Putting a number on it

If your clear-day production has slipped, our solar panel loss calculator lets you test a few scenarios. You enter what your system produces now and a loss you think is realistic, and it shows what that could mean in kWh and rand over a month and a year. It is an estimate, not a measurement, and cleaning may not recover all of it, but it helps you decide whether a clean is worth booking now or later.

For more on what cleaning can and cannot do for output, read does cleaning solar panels increase output?

Deciding when to book

Put the two pieces of evidence together:

  • Gradual decline in the app, and visible dirt from the ground. This is the clearest sign that a clean is due.
  • Gradual decline, but the panels look clean. It may be the season. Compare with the same weeks last year before deciding.
  • Sudden drop, with or without dirt. Call your installer first.
  • Steady numbers and clear glass. Leave it for now and check again in a month or two.

Many owners in Gqeberha find that once or twice a year suits their roof, with coastal, dusty and tree-lined homes needing more. Our guide on how often to clean solar panels in Gqeberha goes into that in more detail.

When you are ready, see how we clean panels on our solar panel cleaning page. We use soft brushes and water, soak droppings and lift them rather than scraping, and check the roof and the way up before anyone climbs. Send us a photo of your roof and the number of panels through the quote form, and a screenshot of your app if you have one, and we will come back with a quote.

Ready for a cleaner property?

Tell us what needs cleaning and where you’re located. We’ll help you find the right cleaning solution.

WhatsApp
Get a quote WhatsApp